Casper Test Rules: Proctoring, Breaks, Format and AI

Try a free Casper practice scenario

Free, no sign-up to start.

Official Casper test rules from Acuity Insights: proctoring, webcam requirements, the 2 optional breaks, strict AI bans, bullet points, and technical setup.

Try a free Casper practice scenario

Free, no sign-up to start.

Under official Acuity Insights rules, the Casper test takes 65 to 85 minutes across 11 scenarios and includes two optional breaks. You must test alone with an uncovered webcam and working microphone, complete a System Requirements Check within 6 hours before your start time, and never use artificial intelligence (AI) in any form. Using AI triggers a Red Flag that is reported directly to all of your selected academic programs. Sources: About Casper - Acuity Insights, How to Prepare for Casper - Acuity Insights, Terms of Use - Acuity Insights. Last checked November 11, 2026.

Casper format, timing and break rules

According to Acuity Insights, the standard Casper assessment takes about 65 to 85 minutes to complete and is divided into two sections across 11 total scenarios. Select programs, including Australian teacher education programs, use a shorter Casper format with fewer scenarios and reduced testing time. For a full overview of how the assessment fits into your application, see our main Casper test guide.

In the video response section, you complete 4 scenarios with 2 open-ended questions per scenario, and you get 1 minute per response. In the typed response section, you complete 7 scenarios with 2 open-ended questions presented on the same page, and you have 3.5 minutes total to respond to both questions. By our calculation from Acuity Insights format figures, your total active answering time across all 11 scenarios is 32.5 minutes (8 minutes of recorded video responses across 8 questions, plus 24.5 minutes of typed responses across 7 scenarios). That equals an average of 1.75 minutes per typed question if you split your time evenly.

The 65 to 85 minute test window includes two optional breaks. However, once you have started taking a Casper assessment or initiated a session, you cannot stop and complete it at a later time. You must also enter your test within 15 minutes of the scheduled start time or your test will be locked.

Official Casper test format and timing breakdown (Acuity Insights, vs. AAMC PREview format for comparison where applicable to medical applicants): Casper requires open-ended video and typed responses across 11 scenarios, whereas the AAMC PREview exam presents 186 total items rated on a four-point effectiveness scale.
Test ComponentScenariosQuestions per ScenarioResponse Time AllowedTotal Active Response Time (Our Calculation)
Video responses4 scenarios2 open-ended questions1 minute per response8 minutes total
Typed responses7 scenarios2 open-ended questions (on the same page)3.5 minutes total for both questions24.5 minutes total (1.75 minutes per question)
Total Assessment11 scenarios22 questions totalIncludes 2 optional breaks32.5 minutes active answering (65 to 85 minutes total duration)

Artificial intelligence (AI) rules and human scoring

Under the Acuity Insights Terms of Use, the use of Artificial Intelligence (AI) in any form when completing assessments is strictly prohibited. Any detected use of AI constitutes a Red Flag. When a Red Flag occurs, all applicable academic programs you selected for score distribution are notified of the violation along with relevant details.

Acuity may also flag inappropriate or unusual examination responses, video images, or interactions with Acuity personnel that occur due to AI use or other reasons, and share those Red Flags directly with your academic programs.

Casper is scored by certified human raters rather than AI. While some other Acuity assessments may use AI technologies, the Terms of Use explicitly note that the Casper Admission Assessment rating is an exception and is human rated. By providing your assessment data (written responses, audio, and video), you do consent to Acuity using that data to train, test, and improve its internal AI models, though you can withdraw consent for that training use at any time by emailing security@acuityinsights.com without affecting your ability to use Acuity's core assessment services.

Proctoring, webcam and room security rules

Acuity states that the Casper test is proctored and monitored for cheating just like a test at a brick-and-mortar delivery center. During your assessment, Acuity remotely monitors your session through keystroke, audio, and visual proctoring using your webcam and computer microphone. Access to both devices is mandatory, and lacking a required device or denying access is grounds to deny you entry to the test.

To comply with Acuity Insights security and Terms of Use rules, you must follow strict identity and environment requirements before and during your session.

  • Government ID verification: You must register with a government-issued photo ID (in English or French) using the exact same name and email address as your program application. Your government ID must be verified before your test, which requires taking a live photo of yourself and your ID at the same time.
  • Appearance changes: If the photo on your ID is substantially different from your current appearance due to an accident, cosmetic surgery, medical treatment, or otherwise, you must notify Acuity ahead of your assessment date so they can determine how to validate your ID and avoid a potential Red Flag.
  • Uncovered webcam: You must have a working webcam online and uncovered for the entirety of the Casper test. Do not cover your camera at any point while testing.
  • Testing alone: The person registering must be the exact same person taking the test. You must take the test alone in a quiet, distraction-free space, and you may not discuss the test with anyone or receive assistance from any third party.
  • Strict confidentiality: All Casper test scenarios and contents are proprietary intellectual property and trade secrets of Acuity. You may not share, convey, or disclose any details or contents of the test to any third party, publicly or privately.

Rules for formatting, bullet points and response content

Because typed scenarios give you 3.5 minutes total to answer 2 questions on the same page, Acuity Insights gives test takers flexibility in how they structure written answers. You are explicitly permitted to use bullet points in typed responses. Acuity notes that some applicants find it helpful to list their main points in bullets first before adding detail, especially when concerned about the timer.

Because each question is scored individually, Acuity advises making sure you allow enough time to answer both questions on the page rather than spending all 3.5 minutes on the first prompt. Using the official rule that allows bullet points and ignores minor grammar or spelling errors, you can outline your core reasoning for both questions in the first 30 seconds, spend 90 seconds expanding Question 1, and use the final 90 seconds to flesh out Question 2 so you never leave the second prompt blank.

Raters are trained not to consider spelling mistakes, grammar issues, or the use of jargon when evaluating your responses. If you do not finish a sentence before the timer runs out, raters know you are under a time limit and prioritize understanding your overall point and both what you would do and why.

There are two strict content prohibitions you must follow while answering:

First, while completing the assessment, you must refrain from submitting responses that contain information that could reasonably be used to directly identify you, such as your name, address, or student identification number.

Second, you must abide by Acuity's Respect and Anti-Harassment Policy. Verbal or written comments that are offensive, ridicule, denigrate, insult, or show hostility toward an individual or group constitute a breach of the Terms of Use.

Technical requirements and the 6-hour System Requirements Check rule

You are responsible for ensuring your hardware, internet, and Wi-Fi connectivity are in working order. Acuity Insights enforces a mandatory timeline for checking your equipment before your test begins.

  • The 6-hour System Requirements Check rule: You must complete the System Requirements Check in your Acuity Insights account at least once within the 6 hours before your scheduled test start time. Completion within this 6-hour window is required before you can begin.
  • Consequences of skipping the 6-hour check: If you do not complete the check within the 6 hours prior to your start time, you will be prompted to complete it before starting your test. This can delay your start time (risking the 15-minute lockout window) and could require you to reschedule, where rescheduling fees may apply.
  • Same equipment and location: You must run the System Requirements Check using the exact same computer, internet connection, webcam, microphone, and keyboard that you will use for your test, and in the same physical location where possible.
  • Supported browsers only: You must use the latest version of Google Chrome or Mozilla Firefox. No other browsers are supported. Acuity recommends installing both Chrome and Firefox so you have a backup browser ready.
  • Disable VPNs, firewalls, and plug-ins: You must disable VPNs, network firewalls, and plug-ins before testing, as VPNs and firewalls interfere with video playback and webcams.

Pre-test checklist: Timeline from 4 weeks out to test start

We built this chronological checklist from Acuity Insights rules so you do not miss a mandatory registration, verification, or technical window.

Casper rule compliance checklist by deadline (Built by our team from Acuity Insights rules). Note that applicants approved for participating U.S. or UK Fee Assistance Programs (such as the AAMC Fee Assistance Program, which requires a U.S.-based home address and family income at or below 400% of the national poverty level) may be eligible to have their Casper test fees waived or reduced upon registration.
WhenMandatory Rule or ActionWhat Happens if You Miss It
At least 4 weeks before test dateSubmit an Accommodations Request Form and supporting documentation after creating your account if you need testing accommodations.Accommodations require at least 4 weeks advance notice to be processed before your scheduled test.
Before test dayCheck your Acuity Insights test page for any yellow or red warning messages (such as an unverified account) and verify your time zone using the account countdown clock.Any unresolved warnings on your test page will prevent you from starting the test.
Within 6 hours before start timeComplete the mandatory System Requirements Check on your test computer in Chrome or Firefox with VPNs, firewalls, and plug-ins disabled.You will be forced to run the check at start time, delaying entry and potentially requiring a paid reschedule.
Within 15 minutes of start timeEnter your test session alone with your webcam uncovered and microphone active.Your test will automatically lock 15 minutes after the scheduled start time.

Account limits, retakes, rescoring and rule violation penalties

Show details

Acuity Insights enforces strict policies around account creation, retakes, and Terms of Use violations:

One account and one test per cycle: You are only permitted to have one Acuity Insights account. Applicants are not permitted to take a Casper test type (such as American Health Sciences or Canadian Health Sciences) more than once per admissions cycle, and scores are only valid for a single admissions cycle and a singular test type. Separate Casper tests are only required if you apply to programs requiring different test types, countries, or languages.

Fit-to-sit declaration: By starting the assessment, you formally confirm that you are physically, mentally, and emotionally fit to sit the test and know of no reason your performance would be adversely affected. If illness or personal circumstances may negatively impact you, you must not begin the assessment and should contact support before starting. You can only reschedule a Casper test prior to starting the online examination process.

No retakes or rescoring: Applicants may not request a rescore of any assessment. Retake requests are considered only in the event of a technical problem verified by the Acuity proctoring and security team. You should contact Acuity Support immediately if a technical issue occurs during your test, and you must report the technical problem and request a retake no more than 1 week following the assessment date. Any request received after 1 week will be denied, and retakes may also be denied if the issue was caused by an improper testing setup.

Penalties for rule breaches: If remote monitoring or proctoring reveals non-compliance with the Terms of Use, Acuity may stop your assessment, cancel your reservation, and refrain from distributing your results to academic programs. Depending on the severity of the breach, Acuity may also block your access to assessments and communication platforms for the remainder of the current admissions cycle, for up to 5 years, or in perpetuity. All decisions made under Acuity's Breach Review Policy and Process are final and non-appealable, and Acuity reserves the right to share its decision with your academic programs.

Practice question

Official Acuity Insights sample scenario: You are a group member. One of your group members, Paul, has stopped contributing to your group assignment due to a medical condition. (1) How should you and your group members handle this situation? Explain your response. (2) Imagine that Paul contributed a significant amount to the assignment before he put his courses on hold. How, if at all, would this change your response to the previous question? Explain your reasoning.

See an example answer

Example answer written by our team. The applicant is invented. Question 1: - Check in privately with Paul first to express support without prying into his medical details, and ask what he feels able to do or if he needs to step back completely. - Meet with the remaining group members to divide the remaining tasks fairly so our project stays on schedule without building resentment. - Speak with the course instructor if the workload becomes unmanageable for the smaller team, focusing on timeline support rather than complaining about Paul. Why: This balances empathy and respect for Paul's privacy with our shared responsibility to complete the assignment on time. Question 2: - My core approach to supporting Paul and redistributing the remaining tasks stays the same, because his health still comes first. - However, I would explicitly document and tell the instructor that Paul completed a substantial portion of the foundational work before his medical leave. Why: It is an issue of fairness and ethics to make sure Paul receives full academic credit for the work he already contributed toward our final submission, even if he cannot finish the course with us.

This response follows Acuity Insights' official test prep and Terms of Use rules: it uses bullet points to get clear answers down for both individually scored prompts within 3.5 minutes (for example, spending 30 seconds outlining bullet stubs for both questions, 90 seconds expanding Question 1, and 90 seconds expanding Question 2), explicitly states both 'what' and 'why' for the human rater, and avoids including any personal identifying information like the test taker's real name or student ID.

Frequently asked questions

Can you use AI on the Casper test?

No. The use of Artificial Intelligence (AI) in any form while completing Casper is strictly prohibited under the Acuity Insights Terms of Use. Any detected use of AI triggers a Red Flag, and Acuity will notify all of the academic programs you selected of the violation.

Are there breaks during the Casper test, and can you pause it?

The 65 to 85 minute Casper test includes two optional breaks. However, once you initiate your test session, you cannot pause or stop the assessment to complete it at a later time.

Can I use bullet points on Casper, and do spelling mistakes count?

Yes, Acuity Insights explicitly allows you to use bullet points in your typed responses to list main ideas or structure your thoughts. Furthermore, human raters are trained not to consider spelling mistakes, grammar issues, or jargon when scoring your answers.

What happens if I log in late or forget the System Requirements Check?

You must enter your Casper test within 15 minutes of the scheduled start time or the test will be locked. You must also complete the System Requirements Check within the 6 hours before your scheduled start time, or you will be delayed at login and may have to pay to reschedule.

Can I retake the Casper test or ask for a rescore?

No. You can only take a specific Casper test type once per admissions cycle, and rescoring requests are not permitted. Retakes are only considered if you experience a verified technical problem and report it to Acuity within 1 week of your test date.

How is the Casper test proctored?

Acuity remotely monitors your test session using keystroke, audio, and visual proctoring. You must verify your government-issued photo ID beforehand, keep your webcam online and uncovered for the entire test, keep your microphone active, and take the test completely alone.

Sources