MMI Drug Calculation Questions and Worked Examples
Free, no sign-up to start.
Practice MMI drug calculation questions for medicine, pharmacy, and nursing interviews. Step-by-step worked answers for dosing, IV rates, and dilutions.
Free, no sign-up to start.
MMI drug calculation questions test your ability to calculate weight-based dosages, IV infusion rates, solution dilutions, and unit conversions under timed interview conditions. According to the General Medical Council (GMC), UK medical schools set their own admissions criteria across five-year standard degrees and four-year graduate entry programs while preparing students to meet national standards in prescribing and patient care. This guide covers the core formulas, step-by-step worked examples written by our team, and a verbal framework for explaining your math out loud. Sources: GMC: Outcomes for graduates, GMC: Outcomes for graduates - Practical skills and procedures, GMC: Standards and outcomes for medical education. Last checked November 11, 2026.
On this page
- Why healthcare MMIs include drug calculation stations
- Core formulas and unit conversions to know cold
- Step-by-step worked examples: weight-based dosing, IV rates, and dilutions
- How to talk through your calculation and catch errors out loud
- Mental math shortcuts when calculators are not allowed
- 5 more MMI drug calculation practice questions with worked solutions
- Practice question
- Frequently asked questions
- Sources
Why healthcare MMIs include drug calculation stations
Medicine, pharmacy, nursing, and physician associate programs use calculation stations to see how you handle numbers when the clock is running. The math itself is elementary arithmetic: multiplication, division, fractions, and moving decimal points. What makes it hard in an interview is doing it without a calculator while an assessor watches your steps.
Course structures vary from school to school, and all UK medical students must meet the curricular outcomes in Outcomes for graduates to apply for provisional registration. Those standards are supplemented by Practical skills and procedures, which specifies the minimum competence required of newly qualified doctors in areas including prescribing, therapeutic procedures, and patient care. After graduation, new doctors enter the two-year Foundation Program, holding provisional registration with a license to practice in the first year and gaining full registration after completing year one.
Pre-qualification education standards and generic and shared learning outcomes for physician associates (PAs) and anesthesia associates (AAs) also sit under the Promoting excellence framework, which puts patient safety, quality of care, and fairness at the center of training. When a school puts a calculation station in its Multiple Mini Interview (MMI), it is testing whether you have the basic numerical habits that safe prescribing requires: checking your units, writing out a clear method, and spotting an answer that is ten times too big before it reaches a patient.
Because each university sets its own admissions format, check your invitation email or contact the school directly to confirm whether your interview includes a calculation task and whether a simple calculator is provided. For more details on entry requirements and post-graduation training, you can also check the Medical Schools Council and the UK Foundation Programme website. To practice explaining your reasoning out loud under a timer, Confetto runs AI mock MMI stations with follow-up questions and rubric-based feedback. Start your free week.
- What is tested: unit conversions, weight-based dosing, stock concentration to volume, percentage solutions, dilutions, and IV infusion rates.
- How it is scored: assessors look for a clear, logical method as well as the right final number. Showing your steps on paper or speaking them clearly lets an interviewer follow your reasoning even if you make a small arithmetic slip.
- Where to confirm your format: check your interview invitation email or the Medical Schools Council and individual university admissions pages.
Core formulas and unit conversions to know cold
Most mistakes in MMI drug calculations are unit errors, not formula errors. Moving one step down the metric scale shifts the decimal point right, and moving one step up shifts it left. Convert every number in the prompt into the same unit before you divide or multiply.
A percentage weight-in-volume (% w/v) solution always expresses the mass of drug dissolved in a standard volume of liquid. Once you memorize how to convert a percentage solution directly into milligrams per milliliter, you can skip half the working on lidocaine, glucose, and saline questions.
The table below lists our reference summary of standard metric conversions and the core equations used in clinical calculation stations.
- Always convert to the unit used in the stock concentration before calculating volume.
- Write units next to every number on your scratch paper so you can see them cancel out.
- For dilutions, the amount of pure drug stays the same before and after you add water or saline: initial concentration times initial volume equals final concentration times final volume.
| Calculation or conversion | Rule or formula | Quick check |
|---|---|---|
| Grams (g) to milligrams (mg) | Convert mass down one metric step from g to mg | Check that the milligram figure is larger than the gram figure |
| Milligrams (mg) to micrograms (mcg) | Convert mass down one metric step from mg to mcg | Check that the microgram figure is larger than the milligram figure |
| Micrograms (mcg) to nanograms (ng) | Convert mass down one metric step from mcg to ng | Check that the nanogram figure is larger than the microgram figure |
| Liters (L) to milliliters (mL) | Convert volume down one metric step from L to mL | Verify whether the prompt gives volume in L or mL |
| Percentage concentration (% w/v) | Grams of solute per standard hundred-milliliter volume of solution | Convert % w/v to mg/mL before dividing required dose |
| Weight-based dose | Required dose = Patient weight (kg) x Prescribed dose per kg | Check if prompt asks for single dose or daily total |
| Volume to administer | Volume (mL) = Required dose / Stock concentration (dose per mL) | Ensure required dose and stock mass share the same unit |
| Solution dilution | C1 x V1 = C2 x V2 (Diluent to add = V2 minus V1) | V1 must always be smaller than V2 |
| IV pump rate (mL/hr) | Infusion rate (mL/hr) = Total volume (mL) / Time (hours) | If time is in minutes, convert minutes to hours first |
| IV drip rate (drops/min) | Drip rate = (Volume in mL x Drop factor in drops/mL) / Time in minutes | Round final drop rate to the nearest whole drop |
Step-by-step worked examples: weight-based dosing, IV rates, and dilutions
Every scenario below is written and solved by our team to show the exact working an MMI assessor wants to see and hear. Do not just read the final number. Notice how each solution filters out extra clinical details, aligns the units first, and ends with a plain-English sense check.
Worked Example 1: Weight-based pediatric dosing and divided doses (written by our team). Prompt: A child weighing 24 kg has a bacterial infection. The prescribing guide calls for 45 mg/kg/day of an oral antibiotic suspension, divided into three equal doses given every 8 hours. The pharmacy supplies bottles labeled 180 mg in 5 mL. How many milliliters do you give for a single dose?
Step 1: Find the total daily dose in milligrams. Multiply the child's weight by the daily rate: 24 kg x 45 mg/kg/day. To do 24 x 45 in your head, multiply 12 x 90, which is 1,080 mg per day. Step 2: Find the single dose. Divide the daily total by 3 doses: 1,080 mg / 3 = 360 mg per dose. Step 3: Find the volume for one dose. The stock bottle has 180 mg in every 5 mL. Notice that 360 mg is exactly double 180 mg. Multiply 5 mL by 2 to get 10 mL per dose. Sense check: Two 5 mL medicine spoons (10 mL) is a normal, easy-to-measure oral dose for a child.
Worked Example 2: IV infusion rate and drop factor calculation (written by our team). Prompt: An adult patient with heart rate 92 bpm and blood pressure 118/76 mmHg is prescribed 1.5 liters of 0.9% sodium chloride IV over 10 hours. Part A: What is the infusion pump rate in mL/hour? Part B: If no pump is available and you use a manual giving set with a drop factor of 20 drops/mL, what is the drip rate in drops per minute?
Step 1: Ignore the distractor numbers. Heart rate (92 bpm), blood pressure (118/76 mmHg), and the 0.9% concentration are clinical context and do not enter the volume rate math. Step 2 (Part A): Convert 1.5 liters to milliliters: 1.5 x 1,000 = 1,500 mL. Divide by 10 hours: 1,500 mL / 10 hours = 150 mL/hour. Step 3 (Part B): Use the hourly volume to save time. You already know the patient needs 150 mL every 1 hour (60 minutes). Multiply 150 mL by the drop factor (20 drops/mL) and divide by 60 minutes: (150 x 20) / 60. Simplify 20 / 60 to 1 / 3 first, then divide 150 by 3 to get 50 drops per minute. Sense check: 50 drops per minute is just under one drop per second, which is easy to count by eye.
Worked Example 3: Percentage concentration and solution dilution (written by our team). Prompt: You need to prepare 250 mL of a 0.4% (w/v) antiseptic wash for a wound dressing. The clinic shelf only has a 2% (w/v) stock bottle of the same antiseptic and sterile water. How many milliliters of the 2% stock solution and how many milliliters of sterile water do you mix together?
Step 1: Identify your variables for C1 x V1 = C2 x V2. C1 is 2%, V1 is unknown, C2 is 0.4%, and V2 is 250 mL. Because both concentrations are in % w/v, you can keep them as percentages without converting to mg/mL first. Step 2: Solve for V1. 2 x V1 = 0.4 x 250. Since 0.4 x 250 is the same as 4 x 25, the right side equals 100. Now divide 100 by 2 to get V1 = 50 mL of the 2% stock solution. Step 3: Calculate the sterile water needed. Subtract the stock volume from the desired total volume: 250 mL minus 50 mL = 200 mL of sterile water. Sense check: A 0.4% solution is one-fifth as strong as a 2% solution, and 50 mL is one-fifth of 250 mL.
- Filter distractors first: patient age, temperature, blood pressure, and infusion concentration (% saline) are often included in MMI prompts when the question only asks for a fluid rate.
- Check what dilution questions ask for: 'total final volume' (V2) is not the same as 'volume of water to add' (V2 minus V1).
How to talk through your calculation and catch errors out loud
In a live MMI station, sitting in silence for four minutes and announcing a single number at the end is high risk. If your number is wrong, the assessor has no idea whether you misunderstood the prompt or just misread your own handwriting. Speaking your structure out loud turns a math test into a communication station.
Use a simple four-part verbal checklist at every calculation station. It keeps you calm, shows the interviewer your method, and links your arithmetic to patient safety, which is the core focus of the Promoting excellence and Practical skills and procedures standards.
If you want to practice speaking your math while a timer runs, read our guide to MMI practice questions with answers and use our free MMI timer to set a strict 5-minute or 7-minute station clock.
- 1. State the target and filter the prompt right at the start: 'The question asks for the volume in milliliters for one single dose. I need the patient's weight of 60 kg, the prescribed dose of 2 mg/kg, and the stock strength of 40 mg in 2 mL.'
- 2. Standardize the units before multiplying: 'First, I will make sure all mass units are in milligrams and simplify the stock concentration from 40 mg in 2 mL down to 20 mg in 1 mL.'
- 3. Speak each step as you write it: 'Sixty kilograms times 2 mg per kg gives a required dose of 120 mg. Dividing 120 mg by 20 mg per mL gives 6 mL.'
- 4. Run a clinical sanity check and safety step at the end: 'Six milliliters is three 2 mL ampules, which is a plausible injection volume. On a real ward, I would double-check the dosing guide and ask a colleague to check my calculation before drawing up the medication.'
Mental math shortcuts when calculators are not allowed
Show details
Many MMI calculation stations do not allow a calculator, or only give you pen and paper. You do not need to do long division with decimals if you rewrite the problem as a fraction and cancel common factors first.
Practice these five mental shortcuts on paper until they become automatic. They remove decimals and large zeros before you do any hard arithmetic.
- Turn percentage solutions into mg/mL immediately: convert the grams-per-hundred-milliliters percentage directly into milligrams per single milliliter before dividing.
5 more MMI drug calculation practice questions with worked solutions
Show details
Set a timer for 6 minutes and work through these five practice prompts written by our team without a calculator. Write down every step with units before checking the worked answers below.
Prompt 1 (Local anesthetic maximum safe dose, written by our team): The maximum safe dose of plain lidocaine is 3 mg/kg. What is the maximum volume in milliliters of a 1% (w/v) lidocaine solution that can be administered to a 70 kg adult? Worked solution: First find the maximum mass in milligrams: 70 kg x 3 mg/kg = 210 mg. Next convert the 1% solution to mg/mL: 1% means 1 g in 100 mL, which is 1,000 mg in 100 mL, or 10 mg/mL. Finally divide the maximum dose by the concentration: 210 mg / 10 mg/mL = 21 mL.
Prompt 2 (Microgram to milligram infusion conversion, written by our team): An 80 kg intensive care patient requires an intravenous infusion at a rate of 5 micrograms/kg/minute. The infusion bag contains 120 mg of the drug in 250 mL of saline. What rate in mL/hour do you set on the infusion pump? Worked solution: Step 1: Dose per minute = 80 kg x 5 mcg/kg/min = 400 mcg/minute. Step 2: Dose per hour = 400 mcg/min x 60 minutes = 24,000 mcg/hour. Step 3: Convert micrograms to milligrams by dividing by 1,000: 24,000 mcg/hour = 24 mg/hour. Step 4: Find the volume containing 24 mg. The bag has 120 mg in 250 mL. Notice that 24 mg is exactly one-fifth of 120 mg (since 24 x 5 = 120). Divide 250 mL by 5 to get 50 mL/hour.
Prompt 3 (Tablet course dispensing, written by our team): A patient is prescribed a 14-day reducing course of prednisolone tablets. They must take 40 mg once daily for the first 5 days, 20 mg once daily for the next 5 days, and 10 mg once daily for the final 4 days. The dispensary only stocks 5 mg tablets. How many 5 mg tablets do you dispense in total? Worked solution: Days 1 to 5: 40 mg / 5 mg = 8 tablets per day x 5 days = 40 tablets. Days 6 to 10: 20 mg / 5 mg = 4 tablets per day x 5 days = 20 tablets. Days 11 to 14: 10 mg / 5 mg = 2 tablets per day x 4 days = 8 tablets. Total tablets = 40 + 20 + 8 = 68 tablets.
Prompt 4 (Ratio concentration adrenaline dose, written by our team): An adult patient in anaphylaxis requires 500 micrograms of intramuscular adrenaline. The ampule is labeled 1 in 1,000 (which means 1 gram in 1,000 mL). What volume in milliliters do you draw up? Worked solution: Convert 1 gram in 1,000 mL into milligrams per mL: 1,000 mg in 1,000 mL = 1 mg/mL. Convert the required dose of 500 micrograms into milligrams by dividing by 1,000: 500 / 1,000 = 0.5 mg. Volume to draw up = 0.5 mg / 1 mg/mL = 0.5 mL.
Prompt 5 (Fluid bolus and remaining bag volume, written by our team): A 65 kg patient with sepsis is prescribed an immediate IV fluid bolus of 20 mL/kg from a sequence of 500 mL fluid bags. How many 500 mL bags will you open, and how many milliliters will remain in the final bag once the bolus is complete? Worked solution: Total required volume = 65 kg x 20 mL/kg = 1,300 mL. Each bag holds 500 mL, so two bags provide 1,000 mL and you must open a third bag to supply the remaining 300 mL. Volume remaining in the third bag = 500 mL minus 300 mL = 200 mL.
For broader interview preparation across all station types, read our MMI preparation guide and our overview of medical school interview questions. Ready to test your timing out loud? Confetto runs realistic AI mock interviews for medical, pharmacy, nursing, and PA applicants. Start your free week.
Practice question
A 60 kg adult patient is prescribed an intravenous loading dose of a medication at 15 mg/kg to be infused over 30 minutes. The medication comes in vials containing 450 mg in 10 mL. Walk me through how many vials you need, the total volume to draw up, and the infusion pump rate in mL/hour.
See an example answer
Example answer written by our team. The applicant is invented. "I need to find three things: the number of vials, the total volume in milliliters to draw up, and the infusion pump rate in milliliters per hour. First, I will calculate the total mass of drug the patient needs by multiplying their weight of 60 kilograms by the prescribed dose of 15 milligrams per kilogram. Sixty times 10 is 600, and 60 times 5 is 300, so 600 plus 300 gives a total required dose of 900 milligrams. Second, I will look at the stock vials. Each vial contains 450 milligrams in 10 milliliters. Since 900 milligrams divided by 450 milligrams is 2, I need exactly 2 vials. Drawing up 2 full vials of 10 milliliters each gives a total volume of 20 milliliters. Third, I need the pump rate in milliliters per hour. We are infusing those 20 milliliters over 30 minutes, which is half an hour. Twenty milliliters divided by 0.5 hours equals 40 milliliters per hour. As a quick sense check, running a pump at 40 milliliters per hour for 30 minutes delivers 20 milliliters, which matches my two vials. In clinic, I would ask a second clinician to verify my calculation and check the vial labels before setting the pump."
The applicant names all three parts of the prompt right away, splits the mental multiplication (60 x 15) into easy chunks out loud, carries units through every step, and finishes with a reverse check and a clinical safety double-check.
Frequently asked questions
Do all UK medical schools use the same MMI calculation station format?
No. Medical schools across the UK set their own admissions criteria and course structures vary from school to school, so you should check your interview invitation or contact the schools directly to confirm station timings and calculator rules.
Why do medical school interviews test drug calculations before you start the degree?
All medical students must eventually meet the requirements in Outcomes for graduates and Practical skills and procedures, which cover safe prescribing and therapeutic procedures before starting the Foundation Program. Admissions numeracy tasks check that you have the foundational arithmetic skills and attention to detail needed for clinical training.
Are graduate entry medical students tested to the same standards as five-year students?
Yes. Students on four-year graduate entry programs must demonstrate they meet the exact same curricular outcomes to the same standards as students on traditional five-year medical degrees, and they receive an equal UK medical degree.
How do you convert a percentage solution (% w/v) into mg/mL in an MMI?
By clinical convention, a weight-in-volume (% w/v) solution expresses the mass of drug in grams per hundred milliliters of solution. Converting the gram mass into milligrams and dividing by the hundred-milliliter volume gives the concentration in milligrams per single milliliter.
What should I do if I make an arithmetic mistake during an MMI calculation station?
State the correction calmly, cross out the wrong line neatly on your scratch paper, and walk the assessor through your revised step out loud. Explaining your formula and unit conversions clearly shows the interviewer your method is sound and demonstrates safe self-checking.